H
Hose Protection Products
     
                         








.
Hose Protectors
Hose Protectors are durable wear shields made of an abrasion resistant material. Easily attached to almost any size or type hose, the Hose Protector prevents up to 90% of all hose failure due to wear at points of contact.
  • Extremely high wear factor
  • Resists solvents, oils, grease, gasoline, etc.
  • Grooves protect cable ties and prevent slipping
  • Prevents damage from unrestrained hoses
  • Operating temperature range of -40 to +430° F
  • Available in five sizes - 4", 6", 8", 10", 12"
  • All sizes available in Black, Orange or Yellow
Abrasion protection for:
  • Hydraulic Hoses
  • Battery Cables
  • Wiring Harness
  • Brake Systems
  • Fuel Lines
  • Air Lines
  • Radiator Lines
  • Oil Lines
Easy installation in minutes - No need to remove hose
Step One - Locate problem are on hose
Step Two - Place Hose Protector over problem area.
Step Three - Install cable ties, pulling tight with pliers
Step Four - Cut off excess cable ties leaving the hose safely shielded
Hose Spacers and Looms
Hose Spacers & Looms are accessories used to simplify routing and prevent damage from unrestrained hoses. Easy to install and provide protection by separating hoses from points of abrasion and contact. They are constructed using an impact resistant material which gives them high strength, abrasion and chemical resistance and provides for a wide range of operating conditions. This allows Hose Spacers & Looms to withstand the constant impact that many assemblies endure.
Hose Spacer Qualities Available Sizes
Prevents hose abrasion 5/8"
Helps keep hoses organized 3/4" #
Prevents damage from unrestrained hoses 1"
Easy to install 1 1/8" #
1 3/8" #
# - Available Stocked Sizes
Hose Loom Qualities Available Sizes
Prevents hose abrasion 3/16"
Keeps hoses organized 3/4" #
Simplifies hose routing 1/4" #
Prevents damage from unrestrained hoses 1" #
Easy to install 3/8" #
1 1/8" #
1/2" #
1 3/8" #
5/8" #
# - Available Stocked Sizes
Select-A-Loom
The Select-A-Loom is a revolutionary device for the sorting and management of multiple hose, conduit, PVC and cable assemblies. Consists of two main components:
The Frame provides structure and stability for the assembled part. It is constructed using an impact resistant material which gives it high strength, abrasion and chemical resistance as well as a wide range of operating conditions. This allows the Select-A-Loom to withstand the constant impact that many assemblies endure.
The Inserts provide for the Select-A-Loom's overall versatility. They provide the installer with the ability to easily construct an assembly of any possible arrangement or configuration. This allows the Select-A-Loom to cross industry lines and provides the customer with the ability to mix and match PVC, electrical conduit and hydraulic lines seamlessly while preventing damage from unrestrained hoses.
Mounted Version
To be bolted or securely fastened to any surface, holding the assembly rigid.
Expanded Version
Easily extends and expands in seconds, providing for larger assemblies without the need to buy additional frames.
Bulkhead Version
Holds assemblies going through firewalls, bulkheads, interior and exterior walls, or other structures.
Free-Standing Version
To be configured and installed without a need to mount the assembly to a solid surface.
All versions available in A or B Series sizes. Adapter Extension kits also available in A or B Series.
A-Series
Frame sizes
  • 2 Hose Loom1
  • 2 Hose Loom with Tabs1
  • 2 Hose Bulkhead1
  • 4 Hose Loom
  • 4 Hose Loom with Tabs
  • 4 Hose Bulkhead
1(Approximate size 5 1/2" x 3")
Insert sizes (hose outer dimensions)
  • 1/4" (.600)
  • 3/8" (.750)
  • 1/2" (.875)
  • 5/8" (1.02)
  • 1" (1.52)
  • Blank hose insert
  • Conduit and PVC insert
B-Series
Frame sizes
  • 2 Hose Loom1
  • 2 Hose Bulkhead1
  • 4 Hose Loom2
  • 4 Hose Loom with Tabs2
1(Approximate size 3 1/4" x 1 1/2") 2(Approximate size 6" x 1 1/2"
Insert sizes (hose outer dimensions)
  • 1/8" (.375)
  • 3/16" (.4375)
  • 1/4" (.500)
  • 3/8" (.600)
  • 1/2" (.750)
  • Blank hose insert
Cable Ties
Superior Cable Ties possess an outstanding balance of properties; combining strength, durability and a high level of stability.
  • Meets UL standards for electrical applications
  • Resistant to fuels, lubricants, and most chemicals
  • Weather and UV resistant
  • Heat stabilized (-40° to +250°)
  • Impact and abrasion resistant
Available sizes:
  • Miniature (18 lb) - 6"
  • Standard (50 lb) - 7.5" & 11.1"
  • Heavy Duty (120 lb) - 15.1"
Sizes available in black.

Products & Services

 

 

-Request a Catolog by Mail or
Download PDF
Clean Seal, Inc.
20900 W Ireland Rd.
South Bend, IN 46614
800.366.3682
info@cleanseal.com

©2002 Clean Seal and its licensors.All rights reserved.