 |
Black Standard Heater Hose |
 |
A replacement for hose on most cars and light trucks. This standard grade hose is similar to SAE20R3 Class D2 for normal duty service. Withstands the abuse of corrosive solutions and additives. Resists weathering to provide a long, trouble-free service life. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Heater
Black
Black Standard
SAE20R3 Class D2
Black
EPDM
Two Spiral Polyester
EPDM
-40 Degrees F to +212 Degrees F |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| HHS- .625 |
5/8 |
700 |
Standard Black Heater Hose |
Spool |
| GR-HHS-D2-.750 |
3/4 |
500 |
Standard Black Heater Hose |
Spool |
|
Nomex World Spec Heater Hose |
 A replacement for OE hose on all FORD cars, as well as heavy and light trucks chassis. This high quality hose is made from flame retardant Nomex materials and meets or exceeds WSEM96D34-A4 for higher under hood temperatures. Withstands the abuse of corrosive solutions and additives. Resists weathering to provide a long, trouble-free service life. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Heater
Black
Black Standard
WSEM96D34-A4
Black
EPDM
Two Spiral Polyester
EPDM
-40 Degrees F to +212 Degrees F |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| HHFR-.625 |
5/8 |
700 |
Nomex World Spec Heater Hose |
Spool |
|
Gas Tank Fuel Fill Hose |
 Designed for connection between gas tank and filler neck on automotive vehicles. This special hose handles leaded, unleaded, alcohol-added, diesel and most modern fuels. Resists heat, weather, abrasion and ozone. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Fuel Line
Gas Tank Filler
N/A
SAEJ1527 Type A2
Black with Red Stripe
Nitrile
Spiral Polyester Cord
Poloychloropene
257 Degrees F |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| R-FFW-1.00 |
1 |
50 |
Gas Tank Fuel Fill Hose w/wire |
Roll |
| R-FFW-1.250 |
1 1/4 |
50 |
Gas Tank Fuel Fill Hose w/wire |
Roll |
| R-FFW-1.50 |
1 1/2 |
50 |
Gas Tank Fuel Fill Hose w/wire |
Roll |
| R-FFW-1.750 |
1 3/4 |
50 |
Gas Tank Fuel Fill Hose w/wire |
Roll |
| R-FFW-2 |
2 |
50 |
Gas Tank Fuel Fill Hose w/wire |
Roll |
|
Soft Wall Fuel Fill Hose |
 This hose meets the same standards as our gas tank fill hose, but is not wire re-enforced, and must only be used in straight run applications. This provides a production friendly connection application. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Fuel Line
Gas Tank Filler
N/A
SAEJ1527 Type A2
Black with Red Stripe
Nitrile
N/A
Poloychloropene
257 Degrees F |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| R-SWFF-1.00 |
1 |
50 |
Gas Tank Fuel Fill Hose |
Roll |
| R-SWFF-1.50 |
1 1/2 |
50 |
Gas Tank Fuel Fill Hose |
Roll |
| R-SWFF-1.750 |
1 3/4 |
50 |
Gas Tank Fuel Fill Hose |
Roll |
| R-SWFF-2 |
2 |
50 |
Gas Tank Fuel Fill Hose |
Roll |
| R-SWFF-2.375 |
2 3/8 |
50 |
Gas Tank Fuel Fill Hose |
Roll |
|
Low Perm Tier III CARB Hose |
 Our low permeable fuel line is a more cost efficient alternative for those companies wanting to meet the California Air Resources Board (CARB) requirements. While some applications are mandatory to meet the more stringent requirements of SAE30R9 CARB LEV II hose, this fuel line meets the CARB Tier III standards as required under Executive Orders G-05-018. CARB LEV II Low Perm Hose is a suitable low-permeation replacement for most standard SAE30R7 applications. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Fuel Line
700 Series CARB LEV II Low Perm Hose
N/A
SAE30R7 CARB Tier III
Black
Nitrile Rubber
THV Barrier
CSM (Hypalon)®
-40 Degrees F +257 Degrees F Continuous |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| A-LPFL-.250 |
1/4 |
400 |
Low Perm Premium Fuel Line |
Spool |
| A-LPFL-.3125 |
5/16 |
360 |
Low Perm Premium Fuel Line |
Spool |
| A-LPFL-.375 |
3/8 |
150 |
Low Perm Premium Fuel Line |
Spool |
| A-LPFL-.500 |
1/2 |
250 |
Low Perm Premium Fuel Line |
Spool |
|
SAE30R9 CARB LEV II Approved Hose |
 Our SAE30R9 Fuel Injection Hose has been approved by Executive Order C-U-05-002 for use under the CARB LEV II specifications. This hose is also designed for the extremely high temperatures generated by today's fuel injection engines. This hose handles leaded, unleaded, alcohol added, diesel, and extended gasolines, resisting sour fuel oxidation. This product is designed for use in the RV, Off Road, and Mass Transit (Bus) Industries. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Fuel Line
Fuel Injection (SAE30R9)
N/A
SAE30R9/CARB LEV II
Black
Fluroelastomer
Two Spiral Aramid Fiber
CSM
-29 Degrees F +275 Degrees F (+302 Degrees F Intermittent) |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| R-FIL-.250 |
1/4 |
250 |
SAE30R9 CARB LEV II |
Spool |
| R-FIL-.3125 |
5/16 |
250 |
SAE30R9 CARB LEV II |
Spool |
| R-FIL-.375 |
3/8 |
250 |
SAE30R9 CARB LEV II |
Spool |
| R-FIL-.500 |
1/2 |
200 |
SAE30R9 CARB LEV II |
Spool |
|
Standard Premium Fuel Line |
| Designed for conveying most modern fuels in cars, trucks, buses, etc. Handles temperature ranges of -40 to +257 Degrees F. Withstands oil, grease, abrasion and ozone. Meets or exceeds the burst requirements of the SAE30R7 specification. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Fuel Line
SAE30R7
N/A
SAE30R7
Black
Nitrile
Two Spiral Polyester
Nitrile/PVC
-40 Degrees F +257 Degrees F (+302 Degrees F Intermittent) |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| FL-.250 |
1/4 |
250 |
Standard Premium Fuel Line |
Spool |
| FL-.3125 |
5/16 |
250 |
Standard Premium Fuel Line |
Spool |
| FL-.375 |
3/8 |
250 |
Standard Premium Fuel Line |
Spool |
| FL-.500 |
1/2 |
700 |
Standard Premium Fuel Line |
Spool |
| FL-.59375 |
19/32 |
250 |
Standard Premium Fuel Line |
Spool |
|
Gas Tank Vent Hose |
 A low pressure hose built to handle gasoline vapor, carbon monoxide exhaust fumes and engine heat. The cover resists oil, grease, abrasion and ozone, providing extended service life. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Fuel Line
Gas Tank Filler
N/A
Similar to SAEJ30R7
Black
Nitrile
Two Spiral Polyester
CSM
257 Degrees F |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| FT-.625 |
5/8 |
250 |
Gas Tank Vent Hose |
Spool |
| FTP-.750 |
3/4 |
700 |
Gas Tank Vent Hose |
Spool |
|
Air Conditioning Hose |
 GoodYear Galaxy Air Conditioning Hose 4826
*Two Polyester Spiral Barrier Hose
*J51 All Outside Diameters
*Temperature Range -40 to +257 Degress F
*Compatible with:
*R-12/R134a Refrigerants
*Mineral Oil, PAG's
*Meets J2064 "TYPE C Class II" Hose Perfermance
*Low Volumetric Expansion
*Dimensionally Stable
*Flexible - Easy to Route |
| Product Number |
Size (in.) |
Inside Diameter (in.) |
Outside Diameter (in.) |
Packaging |
Length |
| ACBH06-.3125 |
5/16 |
.307 |
.719 |
Reel |
500' |
| ACBH08-.40625 |
13/32 |
.401 |
.875 |
Reel |
500' |
| ACBH10-.500 |
1/2 |
.490 |
.969 |
Reel |
500' |
| ACBH12-.625 |
5/8 |
.615 |
1.094 |
Reel |
500' |
|
Molded Hoses |
 Our molded hoses come in a wide range of shapes and size requirements. These hoses can be made for use in fuel systems, meeting the various SAE30R7, SAE J1527, and the CARB LEV II fuel ratings required. Many of the more traditional SAE20R3 D2 and the SAE20R1 Class B engine coolant molded hoses are also in stock.
Please contact your customer service representative for more details and availability. |
Heavy Duty Air Hose |
 A multi-purpose hose designed for tough general service air and water applications. It features an EPDM tube and cover with a four spiral polyester reinforcement that keeps the hose kink resitant and flexible in extreme temperatures. The cover is resitant to abrasion, weathering and ozone. Rated at 200 to 300 PSI working pressure. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Air
Heavy Duty Bulk Air
N/A
N/A
Red
EPDM
Four Spiral Polyester
EPDM
-40 Degrees F to +212 Degrees F (not for stream use) |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| AH-.500 |
1/2 |
700 |
Heavy Duty Air Hose 7/8" OD, 300PSI W.P. |
Reel |
| AH-.750 |
3/4 |
700 |
Heavy Duty Air Hose
1 3/16" OD, 300PSI W.P. |
Reel |
| AH-1.000 |
1 |
700 |
Heavy Duty Air Hose
1 7/16" OD, 200PSI W.P. |
Reel |
|
Push-On Air Hose |
 This high quality hose can be used by all industries. It has a Class A high oil resitant tube and cover that offers excellent resistance to oil and petroleum based products. It has excellent coupling retention. It holds the special fitting tightly and safely. With an easy push, the spiral hose design grips the fitting securely and maintains a constant internal holding action. The fitting will not give, even under full working pressure. Not recommended for unleaded gasoline. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Air
Push-On Hose
N/A
N/A
Black, Blue, Gray, Red or Yellow
Nitrile
Two Spiral Aramid Fiber
Nitrile/PVC Blend
-30 Degrees F to +160 Degrees F (180 Degrees F Intermittent) |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| PAH-.250 |
1/4 |
250 |
Push-On Hose, Uncoupled |
Reel |
| PAH-.375 |
3/8 |
250 |
Push-On Hose, Uncoupled |
Reel |
| PAH-.500 |
1/2 |
250 |
Push-On Hose, Uncoupled |
Reel |
| PAH-.625 |
5/8 |
250 |
Push-On Hose, Uncoupled |
Reel |
| PAH-.750 |
3/4 |
250 |
Push-On Hose, Uncoupled |
Reel |
|
Windshield Wiper/Vacuum Tubing |
 Low pressure EPDM tubing for windshield washers, vacuum and emissions systems for power accessories. Meets SAE J1037 specifications. Will not deteriorate from heat, weathering or ozone. Maintains its flexibility even at low temperatures. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Windshield Wiper/Vacuum
N/A
N/A
SAE J1037
Black
EPDM
None
N/A
-40 Degrees F to +257 Degrees F (Not for Steam Use) |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| VT-.1094 |
7/64 |
500 |
Windshield Wiper/Vacuum Tubing |
Reel |
| VT-.1563 |
5/32 |
500 |
Windshield Wiper/Vacuum Tubing |
Reel |
| VT-.2188 |
7/32 |
400 |
Windshield Wiper/Vacuum Tubing |
Reel |
|
Engine Coolant Hose |
 A general purpose, low pressure coolant and heater connector built for long lasting performance at temperature ranges of 0 to +212 Degrees F. Resists aging, ozone, chemicals and lubricants. |
Application:
Style:
Grade:
Specifications:
Cover Color:
Construction
Tube:
Reinforcement:
Cover:
Temperature Resistance: |
Engine Coolant
Black
General Purpose Coolant
SAEJ2006
Black
Nitrile/SBR Blend
3 Ply Nylon Screen
Nitrile/SBR Blend
0 Degrees F to +212 Degrees F |
| Product Number |
Inside Diameter (in.) |
Length (ft.) |
Description |
Packaging |
| R-HWWH-1.25 |
1 1/4 |
50 |
Engine Coolant Hose with wire |
Roll |
| R-HWWH-1.50 |
1 1/2 |
50 |
Engine Coolant Hose with wire |
Roll |
| R-HWWH-2.00 |
2 |
50 |
Engine Coolant Hose with wire |
Roll |
| R-SWWH-1.00 |
1 |
50 |
Engine Coolant Hose without wire |
Roll |
| R-SWWH-1.25 |
1 1/4 |
50 |
Engine Coolant Hose without wire |
Roll |
| R-SWWH-2.00 |
2 |
50 |
Engine Coolant Hose without wire |
Roll |
| R-SWWH-2.25 |
2 1/4 |
50 |
Engine Coolant Hose without wire |
Roll |
| R-SWWH-2.50 |
2 1/2 |
50 |
Engine Coolant Hose without wire |
Roll |
|
|
|
|
